"Crossover Design for New Project"

[Earl K]

- Have woofers 1,2,5 & 6 ever been remagged ?
- If not , send a pair into GPA for recharging , & then retest upon return to see if their motor strength improves up to the levels of 3 & 4 .

This is what I was thinking,I have them boxed already.

BTW, have you checked the polarity of those 4 drivers to make sure the cones move in the correct direction ( when pulsed with a 9V battery ) ?

- If they're moving the wrong way at this point / then due to last springs info ( ie; "Panos Plight" ), odds are that your woofers have been previously remagged by a machine using the wrong polarity .
- If that's the case, remagging with the correct polarity isn't likely going to restore them to 100% ( again,, according to "Panos Plight" ) .



Since you have (4) 288C drivers, why not put diaphragm #2 into either driver #3 or #4, to see if you can improve its' HF response to match driver #1 ?

<> cheers